Westermo MRI-128-F4G-PSE24 - Manual (Page 150)

146
Relay Output Type : Port Link
Port : 1, 2, 3, 4, 5,
Event Selection
Event Selection Switch(config)# warning-event
coldstart Switch cold start event
warmstart Switch warm start event
linkdown Switch link down event
linkup Switch link up event
authentication Authentication failure event
fault-relay Switch fault relay event
poe-powering Switch PoE powering or
unpowering event
power Switch power failure event
sfp-ddm Switch SFP DDM abnormal event
super-ring Switch super ring topology
change event
time-sync Switch time synchronize event
Ex: Cold Start
event
Switch(config)# warning-event coldstart
Set cold start event enable ok.
Ex: Link Up event Switch(config)# warning-event linkup
[IFNAME] Interface list, ex:
fa1,fa3-5,gi25-26
Switch(config)# warning-event linkup fa5
Set fa5 link up event enable ok.
Display Switch# show warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4-5
Link Up: fa4-5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disable
PoE Powering:
SFP DDM: Enabled