Westermo MRI-128-F4G-PSE24 User Manual

Page 25

Advertising
background image

21

(VLAN) Interface Configuration: Press interface VLAN VLAN-ID in global

configuration mode and you will then enter VLAN interface configuration mode,
where you can configure the settings for the specific VLAN.

The VLAN interface name of VLAN 1 is VLAN 1, VLAN 2 is VLAN 2…
Type exit to leave the mode. Type ? to see the available command list.

The command lists of the VLAN interface configuration mode.

Summary of the 5 command modes.

Command

Mode

Main Function

Enter and Exit Method

Prompt

User EXEC

This is the first level of access.

Enter: Login successfully

Switch>

Switch(config)# interface fa1
Switch(config-if)#
acceptable

Configure 802.1Q acceptable frame types of a port.

auto-negotiation Enable auto-negotiation state of a given port
description

Interface specific description

duplex

Specify duplex mode of operation for a port

end

End current mode and change to enable mode

exit

Exit current mode and down to previous mode

flowcontrol

Set flow-control value for an interface

garp

General Attribute Registration Protocol

ingress

802.1Q ingress filtering features

lacp

Link Aggregation Control Protocol

list

Print command list

loopback

Specify loopback mode of operation for a port

mac

MAC interface commands

mdix

Enable mdix state of a given port

no

Negate a command or set its defaults

qos

Quality of Service (QoS)

quit

Exit current mode and down to previous mode

rate-limit

Rate limit configuration

shutdown

Shutdown the selected interface

spanning-tree spanning-tree protocol
speed

Specify the speed of a Fast Ethernet port or a

Gigabit Ethernet port.
switchport

Set switching mode characteristics

Switch(config)# interface vlan 1
Switch(config-if)#
description

Interface specific description

end

End current mode and change to enable mode

exit

Exit current mode and down to previous mode

ip

Interface Internet Protocol config commands

list

Print command list

no

Negate a command or set its defaults

quit

Exit current mode and down to previous mode

shutdown

Shutdown the selected interface

Advertising
This manual is related to the following products: