Westermo MRI-128-F4G-PSE24 - Manual (Page 39)

35
Once you finish selecting and configuring the settings, click on Backup or Restore
to run
Click on Folder icon to select the target file you want to backup/restore.
Note that the folders of the path to the target file do not allow you to input space
key.
Type the IP address of TFTP Server IP. Then click on Backup/Restore.
Note: point to the wrong file will cause the entire configuration missed
4.2.8 Firmware Upgrade
In this section, you can update the latest firmware for your switch. Westermo
provides the latest firmware in the Web site. The new firmware may include new
features, bug fixes or other software changes. We’ll also provide the release notes
for the update as well. For technical viewpoint, we suggest you use the latest
Technical Tip:
Default Configuration File: The switch provides the default configuration file in the
system. You can use Reset button, Reload command to reset the system.
Running Configuration File: The switch ’s CLI allows you to view the latest settings
running by the system. The information shown here is the settings you set up but
have
n’t saved to flash. The settings not yet saved to flash will not work after power
recycle. You can use show running-config to view it in CLI.