Westermo MRI-128-F4G-PSE24 - Manual (Page 67)

63
4.4.6 Command Line for PoE control
Syntax show poe system
Parameters --
Command Mode Enable mode
Description Display the status of the PoE system.
Examples Switch> enable
Switch# show poe system
PoE System
PoE Admin : Enable
PoE Hardward : Normal
PoE Input Voltage :
Vmain 1 : 52.8 V
Vmain 2 : 53.0 V
Vmain 3 : 52.5 V
Ouput power : 0.0 Watts
Temperature 1 : 39 degree