Westermo MRI-128-F4G-PSE24 - Manual (Page 138)

134
Once you finish configuring the settings, click on Apply to apply your configuration.
Port control: Force Authorized means this port is authorized; the data is free to
in/out. Force unauthorized just opposite, the port is blocked. If users want to
control this port with Radius Server, please select Auto for port control.
Reauthentication: If enable this field, switch will ask client to re-authenticate. The
default time interval is 3600 seconds.
Max Request: the maximum times that the switch allow client request.
Guest VLAN: VLAN ID 0 to 4094 is available for this field. If this field is set to 0, that
means the port is blocked for failed authentication. Otherwise, the port will be set
to a Guest VLAN.
Host Mode: if there are more than one device connected to this port, set the Host
Mode to single means only the first PC authenticate success can access this port. If
this port is set to multi, all the devices can access this port once any one of them
pass the authentication.
Control Direction: determined devices can end data out only or both send and
receive.
Re-Auth Period: Control the Re-authentication time interval, 1~65535 is available.
Quiet Period: When authentication failed, Switch will wait for a period and try to
communicate with radius server again.
Tx period: The time interval of authentication request.
Supplicant Timeout: the timeout for the client authenticating
Sever Timeout: The timeout for server response for authenticating.