Yaskawa Sigma-5 User Manual: Setup for Linear Motors - Manual (Page 172)

5 Trial Operation (Checking Linear Servomotor Operation)
5.6.3 JOG Operation Using SigmaWin+
5-36
Refer to SigmaWin+ online manual for details. Follow the steps below to view the
online manual.
<How to view the online manual>
1.
Turn ON the computer.
2.
Open the YE_Applications folder.
3.
Open the Manual folder.
4.
Open SigmaWin+ English Edition Online Manual.
6
• Start JOG operation.
When you click , the linear servo-
motor will move in the forward direction.
When you click , it will move in
reverse.
Confirm that the linear servomotor correctly
moves while the button is being clicked. At
the same time, carefully inspect the linear
servomotor’s condition and check the follow-
ing points in particular. If a problem is found,
correct it.
• Is there any unusual vibration?
• Is there any unusual sound?
• Is the temperature rising unusually high?
7
• Servo OFF
Click .
(Screen display will return to the display
shown at step 4.)
8
• Terminate JOG operation.
Click to close the JOG operation win-
dow.
You will return to the main window.
(cont’d)
Step Operation Display