Yaskawa Sigma-5 User Manual: Setup for Linear Motors - Manual (Page 4)

iv
 IMPORTANT Explanations
The following icon is displayed for explanations requiring special attention.
 Notation Used in this Manual
In this manual, the names of reverse signals (ones that are valid when low) are written
with a forward slash (/) before the signal name, as shown in the following example:
Example
S-ON = /S-ON
 Manuals Related to the Σ-V Series
Refer to the following manuals as required.
• Indicates important information that should be memorized, as well as
precautions, such as alarm displays, that do not involve potential damage
to equipment.
Name
Selecting
Models
and
Peripheral
Devices
Ratings
and
Specifi-
cations
System
Design
Panels
and
Wiring
Trial
Operation
Trial
Operation
and
Servo
Adjustment
Maintenance
and
Inspection
Σ-V Series
Product Catalog
(No.: KAEP S800000 42)
 
Σ-V Series
User's Manual
Design and
Maintenance
Linear Motor/Analog
Voltage and Pulse
Train Reference
(No.: SIEP S800000 47)
    
*
Σ-V Series
User's Manual
Design and
Maintenance
Linear Motor/
MECHATROLINK-II
Communications
Reference
(No.: SIEP S800000 48)
    
*
Σ-V Series
User’s Manual
MECHATROLINK-II
Command
(No.: SIEP S800000 54)
  