Yaskawa Sigma-5 User Manual: Setup for Linear Motors - Manual (Page 9)

ix
• Provide an appropriate braking device on the machine side to ensure
safety.
Failure to observe this warning may result in injury.
• Do not come close to the machine immediately after resetting a momentary
power loss. The machine may restart unexpectedly. Take appropriate mea-
sures to ensure safety against an unexpected restart.
Failure to observe this warning may result in injury.
• Connect the ground terminal according to local electrical codes (100 Ω or
less for a SERVOPACK with a 100, 200 V power supply. 10 Ω or less for a
SERVOPACK with a 400 V power supply.)
Improper grounding may result in electric shock or fire.
• Installation, disassembly, or repair must be performed only by authorized
personnel.
Failure to observe this warning may result in electric shock or injury.
• The person who designs a system using the safety function (Hard Wire
Base Block function) must have full knowledge of the related safety stan-
dards and full understanding of the instructions in Σ -V Series User’s Man-
ual Design and Maintenance (No.: SIEP S800000 47/48/65/66).
Failure to observe this warning may result in injury or damage to the product.
WARNING