RIGOL MSO/DS2000A Series - Manual (Page 159)

Chapter 6 MATH and Measurements RIGOL
MSO2000A/DS2000A User’s Guide 6-23
All Measurement
All measurement could measure all the time and voltage parameters (each
measurement source has 21 items, measurements can be performed on CH1, CH2
and MATH at the same time) of the current measurement source and display the
results on the screen. Press Measure  Display All to enable or disable the all
measurement function. Press Measure Source and use
to select the channel(s)
to be measured (CH1, CH2 and MATH).
 When all measurement is enabled, “One-key” measurement is also valid.
 “To Clear the Measurement” will not clear the results of all measurement.
Figure 6-7 All Measurement
One-key
Measurement
All Measurement