RIGOL MSO/DS2000A Series - Manual (Page 285)

Chapter 15 System Function Setting RIGOL
MSO2000A/DS2000A User’s Guide 15-17
Option Management
This oscilloscope provides multiple options to fulfill your measurement requirements.
Please contact your
RIGOL sales representative or RIGOL technical support to
order the corresponding options. You can view the options currently installed on the
oscilloscope or activate the newly bought option serial number through this menu.
Press Utility  Options  Installed to view the options currently installed on the
oscilloscope. Press Setup to enter the serial number activation operation menu.
 Editor: press this softkey to turn on the serial number input interface as shown
in the figure below. Use to select the characters on the virtual keyboard and
press down the knob to input the character.
Figure 15-6 Option Serial Number Input Interface
 Backspace: press this softkey to delete the characters in the “Serial Number
Input Area” from the right to the left.
 Clear: press this softkey to clear all the characters in the “Serial Number Input
Area”.
 Apply: press this softkey and the oscilloscope will activate the corresponding
option using the serial number currently input.
Serial Number Input Area Character Selecting Area