RIGOL MSO/DS2000A Series - Manual (Page 18)

RIGOL
XVI MSO2000A/DS2000A User’s Guide
Document Overview
Main Topics of this Manual:
Chapter 1 Quick Start
Introduce the preparations before using the
oscilloscope and provide a basic introduction
of the instrument.
Chapter 2 To Set the Vertical System Introduce the vertical system functions of
the oscilloscope.
Chapter 3 To Set the Horizontal
System Introduce the horizontal system functions of
the oscilloscope.
Chapter 4 To Set the Sample System Introduce the sample system functions of
the oscilloscope.
Chapter 5 To Trigger the Oscilloscope Introduce the trigger mode, trigger coupling,
trigger holdoff, trigger source and various
trigger types of the oscilloscope.
Chapter 6 MATH and Measurements Introduce how to make math operation,
cursor and auto measurements.
Chapter 7 Digital Channel Introduce how to use the digital channels of
the mixed signal digital oscilloscope.
Chapter 8 Protocol Decoding Introduce how to decode the input signal
using those common protocols.
Chapter 9 Reference Waveform Introduce how to compare the input
waveform with the reference waveform.
Chapter 10 Pass/Fail Test Introduce how to monitor the input signal
using the Pass/Fail test.
Chapter 11 Waveform Record Introduce how to analyze the input signal
using waveform record.
Chapter 12 Display Control
Introduce how to control the display of the
oscilloscope.
Chapter 13 Signal Source Introduce how to use the built-in signal
source.
Chapter 14 Store and Recall Introduce how to store and recall the setting
file, waveform file and so on.
Chapter 15 System Function Setting Introduce how to set the remote interface
and system-related functions.
Chapter 16 Remote Control Introduce how to control the oscilloscope