RIGOL MSO/DS2000A Series - Manual (Page 276)

RIGOL Chapter 15 System Function Setting
MSO2000A/DS2000A User’s Guide 15-8
System Information
Press Utility  System  System Info to view the version information of your
oscilloscope. The system information contains the following contents as shown in the
figure below.
Figure 15-2 System Information Interface
Power-off Recall
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Press Utility  System  Power On to select “Last” or “Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.