RIGOL MSO/DS2000A Series - Manual (Page 292)

RIGOL Chapter 16 Remote Control
MSO2000A/DS2000A User’s Guide 16-6
Remote Control via LAN
1. Connect the device
Connect the oscilloscope to your LAN using a network cable.
2. Configure network parameters
Configure the network parameters of the oscilloscope according to the
description in “LAN Setting”.
3. Search device resource
1) Start the Ultra Sigma, click and the window as shown below is
displayed.
2) Click to search for the instrument resource connected to the local
network. The name of the instrument resource found will be displayed in
the window at the right, as shown in the figure below.
3) Click to add the instrument resource.