RIGOL MSO/DS2000A Series - Manual (Page 188)

RIGOL Chapter 8 Protocol Decoding
8-10 MSO2000A/DS2000A User’s Guide
I2C Decoding (Option)
I2C serial bus consists of the clock line (SCLK) and the data line (SDA).
SCLK: sample the SDA on the clock rising edge or falling edge.
SDA: denote the data channel.
Host
Device
SCLK
SDA
A2
A1
A0
Vcc
SCLK
SDA
Figure 8-6 I2C Serial Bus
Press Decode1  Decode to select “I2C” and open the I2C decoding function
menu.
1. SCLK Setting
Press SCLK to select any channel (CH1, CH2 or any channel of D0-D15) as the
clock channel.
If the clock channel is set to CH1 or CH2, press SCLKThreshold to set the
threshold of the clock channel. The range of the threshold is decided by the
vertical position and scale, and is from (-5*vertical scale - vertical position) to
(5*vertical scale - vertical position). If the clock channel is set to any channel of
D0-D15, SCLKThreshold will be hidden automatically.
2. SDA Setting
Press SDA to select any channel (CH1, CH2 or any channel of D0-D15) as the
data channel.
If the data channel is set to CH1 or CH2, press SDAThreshold to set the
threshold of the data channel. The range of the threshold is decided by the