Kyocera Command Center RX - Manual (Page 24)

Address Book
20 Embedded Web Server
"serv.example.com" domain:
cn=Users,dc=serv,dc=example,dc=com
To search through the "Sales div" Organizational Unit (OU) in the Active Directory
"serv.example.com" domain:
ou="Sales div",dc=serv,dc=example,dc=com
To search through the user's container "Hanako Yamada" which belongs to
"Sales2" Organizational Unit (OU) in the Active Directory "serv.example.com"
domain:
cn="Hanako Yamada",ou=Sales2,dc=serv,dc=example,dc=com
If there are one or more blank spaces in each of value, you have to enclose the
value in double quotation marks (").
8. LDAP Security: Configure this setting in the Protocol Settings page under
Network Settings.
9. Authentication Type: Select an authentication type from the drop-down list.
10.Connection Test: This will test one transmission for each press, attempting to
establish communication with the LDAP server.
Display Sequence
Select a Display Mode from Display from the first name and Display from the
family name on the drop-down list.
Search Settings 1 (to 2)
You can configure the following settings.
1. Search Criteria: Enter Display Name and LDAP Attribute as a search criteria.
2. Return Value: Enter LDAP Attribute as a return value and select Job Type from
the drop-down list.
3. Optional Return Value: Enter Display Name and LDAP Attribute as an optional
return value.
5.
If prompted, configure the following settings for External Address Book (FAX Server).
External Address Book Name
Enter the external address book name.
LDAP Server Settings
Configure the LDAP server.
1. LDAP Server Name: Specifies a name or IP address for the LDAP server.
2. LDAP Port Number: Sets the port number used by LDAP. The default port is 389.
3. Search Timeout: Specifies the timeout in seconds after which a search on the
LDAP server expires.
4. Login User Name: Enter the name of the user to access the LDAP server.
5. Login Password: Enter the password of the user to access the LDAP server.
6. Max Search Results: Enter the maximum value of the search results using
Search Settings.
7. Search Base: Enter the basic information of search.
Entry example of Search Base is as follows.
To search through the "Users" container in the Active Directory
"serv.example.com" domain:
cn=Users,dc=serv,dc=example,dc=com
To search through the "Sales div" Organizational Unit (OU) in the Active Directory
"serv.example.com" domain:
ou="Sales div",dc=serv,dc=example,dc=com