Kyocera Command Center RX - Manual (Page 80)

Network Settings
76 Embedded Web Server
2.
This section includes the following items for configuration.
Wi-Fi
Select On when you use the wireless LAN communication using Wi-Fi.
Network Name (SSID)
Enter the SSID (Service Set Identifier) of wireless LAN connects to the device.
Network Authentication
Select the network authentication method from the drop-down list.
Encryption
Configure the encryption method. If you select Open in Network Authentica-
tion,select Disable or WEP.
If you select WPA2/WPA-PSK or WPA2/WPA-EAP in Network Authentica-
tion,select AES or Auto.
If you select WPA2-PSK or WPA2-EAP in Network Authentication, AES is
applied as Encryption.
WEP Key Index
Enter the WEP key index when you select Open in Network Authentication, and
WEP in Encryption.
WEP Key
Enter the WEP key index when you select Open in Network Authentication, and
WEP in Encryption.
Pre-shared Key
Enter the pre-shared key index when you select WPA2/WPA-PSK or WPA2-PSK in
Network Authentication.
3.
Click Submit button.
IEEE802.1X
This setting appears when WPA2/WPA-EAP or WPA2-EAP is selected in Network
Authentication.
1.
Click Wireless LAN under Network Settings on the navigation menu. The Wireless
LAN Settings page opens.
2.
This section includes the following items for configuration.
Effective Encryption
Select a method of encryption from EAP-TLS, EAP-TTLS, EAP-FAST and
PEAP(EAP-MS-CHAPv2) on the drop-down list.
Tunneled Authentication Protocol
This protocol is activated when EAP-TTLS has been selected for encryption. Select
a method of authentication from MSCHAPV2, MSCHAP, CHAP, and PAP on the
drop-down list.