Kyocera Command Center RX - Manual (Page 50)

Function Settings
46 Embedded Web Server
2.
You can configure settings for Transmission. Make the following settings:
1. Local FAX Name: Specifies your FAX system name.
2. TTI: Selects On or Off whether to send the TTI (Transmit Terminal Identifier)
information to the other party.
3. TTI Position: Selects the position of the TTI to be printed on the transmitted
documents.
4. Account as Local FAX Name: Set to On to use the account name as the local
FAX name. The account name appears in place of the local FAX name.
5. Retry Times: Specify the Retry Times from 0 to 14 times.
3.
You can configure settings for Reception. Make the following settings:
1. Media Type: Sets the media type to print the received documents.
2. Use MP Tray: Selects whether or not to include the MP (multi-purpose) tray for
auto media selection when printing received documents. When turned On, the MP
tray will be included as an option for auto media selection, and when turned Off,
only the cassettes will be selected.
3. Reduced RX Size: Specifies the printing configuration for printing a document,
which is larger than the selected paper size. When Same Size Override is
selected, the document will be printed on multiple sheets of paper without reducing
the text. When Reduction Override is selected, the document will be printed on
one sheet whenever possible.
4. Receive Data/Time: Selects On or Off whether to print the reception information
such as the received date, the received time, the transmitting party's information
and the number of transmitted pages on the top of the received documents.
5. Duplex Printing: Specifies whether or not to use the Duplex mode.
6. 2 in 1 Printing: Enables or disables 2 in1 reception.
7. Batch Print: Selects whether or not perform batch print of the received
documents.
4.
Click Submit button.
Fax Settings
1.
Click FAX/i-FAX under Function Settings on the navigation menu. The FAX/i-FAX
Settings page opens.
2.
You can configure settings for General. Make the following settings:
1. Local FAX Number: Specifies your FAX system number.
2. Local FAX ID: Specifies your FAX ID.
3. Speaker Volume: Sets the volume of the internal speaker that allows you to listen
to the other party or to verify the conditions on the telephone line when the On-
Hook key was pressed. Select the speaker volume from 0 (Mute) to 5
(Maximum).
4. Monitor Volume: Sets the volume of the internal speaker that allows you to verify
the FAX tones during FAX communication. Select the speaker volume from 0
(Mute) to 5 (Maximum).
3.
You can configure settings for Transmission. Make the following settings:
1. Dialing Mode: According to the type of telephone line you are contracted with,
select Tone (DTMF), Pulse (10PPS), or Pulse (20PPS).
2. TX Start Speed: Selects the speed rate at starting transmission from 33600bps,
14400bps, and 9600bps. Once communication is established, the speed rate that
is slower than the other is employed.