Kyocera Command Center RX - Manual (Page 81)

Network Settings
User Guide 77
Login User Name
Enter the name of the user to access the printing system. The IEEE802.1X client
certificate of this user must be valid.
Password
This protocol is activated when EAP-TTLS, EAP-FAST, or PEAP(EAP-MS-
CHAPv2) has been selected for encryption. Enter the password.
Common Name
This protocol is activated when EAP-TTLS, EAP-FAST, or PEAP(EAP-MS-
CHAPv2) has been selected for encryption. Specifies the common name of the
server certificate if the server is required to be authenticated.
Match Rule of Common Name
This protocol is activated when EAP-TTLS, EAP-FAST, or PEAP(EAP-MS-
CHAPv2) has been selected for encryption. When the server certificate is verified,
the common name specified under Common Name is compared with the common
name on the server certificate. This item allows you to specify whether the common
names are considered to be matched if they exactly or partially match.
Expiration Verification
When this option is enabled, the expiration of the server certificate is verified at
communicating. If the certificate is expired, communication will fail. When it is dis-
abled, the expiration will not be verified.
IEEE802.1X Client Certificate
The current status is shown in IEEE802.1X Client Certificate. To make advanced
settings, click Settings button and select a device certificate. Click Submit button to
finalize settings. Configure the device certificate on the Certificates page under
Security Settings.
3.
Click Submit button.
Certificate Status
1.
Click Wireless LAN under Network Settings on the navigation menu. The Wireless
LAN Settings page opens.
2.
This section includes the following items for configuration.
Root Certificate 1 (to 5), IEEE802.1X Client Certificate
The content of the certificate is shown. Make settings for the Root Certificate on
the Certificates page under Security Settings.
Wi-Fi Direct Settings
1.
Click Wireless LAN under Network Settings on the navigation menu. The Wireless
LAN Settings page opens.
2.
This section includes the following items for configuration.
Wi-Fi Direct
Select On when you use the wireless LAN communication using Wi-Fi Direct.