Kyocera Command Center RX - Manual (Page 68)

Network Settings
64 Embedded Web Server
DNS Search Suffix (Primary, Secondary)
Specifies the primary and secondary DNS (Domain Name System) search suffix.
When DHCP/BOOTP is turned On, you can select DNS Search Suffix (Primary) or
Use following DNS Search Suffix. When DHCP/BOOTP is turned On and Use
following DNS Search Suffix is selected, you can enter static DNS search suffix in
the Primary and Secondary fields provided.
WINS Servers (Primary, Secondary)
Specifies the IP addresses of the primary and secondary WINS (Windows Internet
Name Service) servers. When DHCP/BOOTP is turned On and Use WINS Server
from DHCP is selected, you can select to use the WINS server obtained via DHCP.
When DHCP/BOOTP is turned On and Use following WINS Server is selected,
you can enter static WINS server information in the Primary and Secondary fields
provided.
Host Name
Specifies how to get a host name. When you want to get a host name from the
DHCP server, select Use Host Name from DHCP. When you want to get a host
name using device setting, select Use Host Name from Device Setting.
3.
Click Submit button.
IPv6 Settings (Wired Network)
1.
Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings
page opens.
2.
This section includes the following items for configuration.
IPv6
Specifies whether or not to enable the IPv6 protocol. Select On to use the IPv6 pro-
tocol.
IP Address
TA static IPv6 address can be entered in this field for the device as part of the sys-
tem network settings. Assigns an IPv6 address to the printing system network com-
ponent. The format of the IPv6 address is a sequence of numbers (128 bit in total)
separated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f.
Prefix Length
Specifies the IPv6 prefix length. It can be a decimal value between 0 and 128.
RA(Stateless)
When the RA(Stateless) is set to On and the network infra-structure provides the
IPv6 address prefix in the Router Advertise information, the IPv6 stateless address
will be generated on the print system.
DHCPv6 (Stateful)
When the DHCPv6(Stateful) is set to On and the network infra-structure prodives
the "Managed address configuration", the IPv6 stateful address (128-bit length) will
be assigned to the print system by DHCPv6 server.