Kyocera Command Center RX - Manual (Page 27)

Device Settings
User Guide 23
6 Device Settings
This page is accessible when you have logged in the embedded server with
administrator privilege, while network authentication or local authentication is enabled.
If prompted, configure the following settings. See the sections below for detailed
information.
• Paper/Feed/Output
• Original Document
• Energy Saver/Timer
• Date/Time
• System
Paper/Feed/Output
This section includes settings that apply to paper size and media type for the paper
loaded in the MP tray and the cassettes, configuring cassette group, paper output, and
the other detailed properties.
Cassette Settings
1.
Click Paper/Feed/Output under Device Settings on the navigation menu. The Paper/
Feed/Output Settings page opens.
2.
Configure the paper size and media type for each cassette.
3.
After confirming the settings, click Submit button.
MP Tray Settings
1.
Click Paper/Feed/Output under Device Settings on the navigation menu. The Paper/
Feed/Output Settings page opens.
2.
Configure the paper size and media type for MP Tray.
3.
After confirming the settings, click Submit button.
Group Settings
1.
Click Paper/Feed/Output under Device Settings on the navigation menu. The Paper/
Feed/Output Settings page opens.
2.
Select the cassette(s) corresponding to your desired group arrangement.
3.
After confirming the settings, click Submit button.
Paper Output Settings
1.
Click Paper/Feed/Output under Device Settings on the navigation menu. The Paper/
Feed/Output Settings page opens.