Kyocera Command Center RX - Manual (Page 5)

Introduction
User Guide 1
1 Introduction
Command Center RX (Remote eXtension), which will hereafter be referred to as the
embedded server, refers to the web server that is built into the printing device. It allows
you to verify the operating status of the device and make settings related to security,
network printing, E-mail transmission and advanced networking.
With the embedded server, the administrator can remotely track paper and toner usages
per user and the status of optional equipment installed. The embedded server also
configures device settings, monitors jobs, and manages document boxes and address
books.
System Requirements
The embedded server operates in the following environment. Check the following before
use.
Protocol
• The TCP/IP protocol is installed on the PC.
• An IP address is assigned to the printing system.
Web browser
• Microsoft Internet Explorer 9.0 or later (Microsoft Internet Explorer operates on
Microsoft Windows XP/ Vista/7/8/8.1, and Microsoft Windows Server 2008/2012.)
• Microsoft Edge (Microsoft Edge operates on Microsoft Windows 10.)
• Mozilla Firefox 14.0 or later
• Safari 5.0 or later (Safari operates on Apple Mac OS X 10.4 or later.)
• Google Chrome 21.0 or later
Accessing the Embedded Server
Access the embedded server by entering the printing system's host name or IP address
in a web browser. Obtain the IP address from your network administrator.
Note: Do not access to other web sites for security reasons while operating the
Command Center RX.
1.
Open a web browser.
2.
Enter the device's host name or IP address as the URL. If you use the host name, you
must first specify the DNS server information. For example, https://192.168.10.1.
If the screen “There is a problem with this website's security certificate.” is displayed,
configure the certificate. For details, see Certificates on page 86. You can also continue
the operation without configuring the certificate.
The embedded server's home page will be accessed and displayed.
For initial login, use the predefined “Admin” as the Use Name, and “Admin” as the
Password to access all the pages. For initial login, use the predefined Admin as the Use
Name, and Admin as the Password to access all the pages. This is set up internally.