Kyocera Command Center RX - Manual (Page 41)

Function Settings
User Guide 37
File Separation
This extract pages as separate files from an output file. You can specify the number
of file separation from 1 to 500 when setting to On according to the machine.
3.
Click Submit button.
Copy
This section includes advanced settings for copying.
1.
Click Copy under Function Settings on the navigation menu. The Copy Settings page
opens.
2.
You can make changes for the following items as required.
Reserve Next Priority
Activate or deactivate to prioritize the next job reserved.
Auto Image Rotation Action
Select the behavior of automatic image rotation in three ways.
Color Table (Copy)
You can specify the color table name.
Note: Color table (Copy) is displayed only when it is downloaded.
3.
Click Submit button.
Function Default
The default settings can be changed in Common/Job Defaults Settings page.
Printer
This section includes advanced settings for printing.
If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the Reset page.
General
1.
Click Printer under Function Settings on the navigation menu. The Printer Settings
page opens.
2.
You can make changes for the following items as required.
Emulation
Set the Emulation Mode.
Alternate Emulation
When you have selected KPDL(Auto) as emulation mode, you can switch between
KPDL and another emulation mode (alternative emulation) automatically according
to the data to print. This item can be displayed when an optional Emulation kit is
installed.