Kyocera Command Center RX - Manual (Page 51)

Function Settings
User Guide 47
3. ECM TX: Turns error correction mode on which corrects errors that may happen
during communication. To let the ECM feature to take effect, error correction mode
must be enabled on both parties in prior.
4.
You can configure settings for Reception. Make the following settings:
1. FAX Receive: Selects the FAX reception mode. The choices are Auto (Normal,
FAX/Tel, TAD or DRD) or Manual. (The selectable option is different depending on
the destination.)
2. Number of Rings (Normal): Specifies the number of rings when FAX Receive is
Auto (Normal). The range is 1 to 15.
3. Number of Rings (FAX/Tel): Specifies the number of rings when FAX Receive is
Auto (FAX/Tel). The range is 0 to 15.
4. Number of Rings (TAD): Specifies the number of rings when FAX Receive is
Auto (TAD). The range is 1 to 15.
5. Remote Switching Dial Number: Specifies the FAX remote switching dial
number. The range is 00 to 99. Remote switching allows you to initiate FAX
reception from a telephone connected to the FAX system.
6. Encryption Key No.: Sets the encryption key number used for encrypted
communication.
7. RX Start Speed: Selects the speed rate at starting reception from 33600 bps,
14400 bps, and 9600 bps. Once communication is established, the speed rate that
is slower than the other is employed.
8. ECM RX: Turns error correction mode on which corrects error that may happen
during communication. To let the ECM feature to take effect, error correction mode
must be enabled on both parties in prior.
5.
You can configure settings for Encryption Key. Make the following settings:
1. Encryption Key Registration: Click Settings button. The Encryption Key
Registration page opens. Specifies the encryption key in hexadecimal. The length
of the encryption key is 16 digits. Enter the encryption key including the numbers
0-9 and the letters A-F.
2. Click Submit button.
6.
You can configure settings for Remote Settings. Make the following settings:
1. FAX Remote Diagnostics: Activate or deactivate the remote FAX diagnosis.
2. Remote Diagnostics ID: Enter the ID (four digits) specified from the customer
center when you activate the FAX Remote Diagnostics.
7.
You can configure settings for TX/RX Restriction. Make the following settings:
1. Transmit Restriction: Selects the transmitting restriction from Off and Permit
List + Address Book.
2. Receive Restriction: Selects the reception restriction from Off, Permit List +
Address Book, and Reject List.
3. Unknown Number Reception: Selects Reject or Permit when you select Reject
List from Receive Restriction.
4. Permit No. List: Permit No. List page allows to add the permitted fax numbers
and delete the fax numbers specified. Clicking List will display Permit No. List
page. Enter the FAX number to add, then click Submit button. To delete a fax
number from Permit No. List, delete the number from Permit No. List page, then
click Submit button.
5. Permit ID List: Permit ID List page allows to add the permitted fax IDs and delete
the fax IDs specified. Clicking List will display Permit ID List page. Enter the FAX
ID to add, then click Submit button. To delete a fax ID from Permit ID List, delete
the fax ID from Permit ID List page, then click Submit button.