Kyocera Command Center RX - Manual (Page 30)

Device Settings
26 Embedded Web Server
Folio
Select On when you want to detect the Folio-size document automatically.
11 x 15"
Select On when you want to detect the 11 x 15"-size document automatically.
Note: Some model type can detect all the originals automatically, or select the default
size of original placed on the platen.
3.
You can select A6 or Hagaki for A6/Hagaki and On (auto detection) or Off for Folio and
11 x 15”, accrding to the machine type.
4.
After confirming the settings, click Submit button.
Custom Original Size
1.
Click Original Document under Device Settings on the navigation menu. The Original
Document page opens.
2.
Select On or Off for each Custom Original (1 to 4). When you want to change the
settings, enter the length (X) and width (Y) of the Custom Paper.
Note: You can enter the length of Custom Paper without selecting On or Off according
to the machine.
3.
After confirming the settings, click Submit button.
Energy Saver/Timer
This section explains how to configure the Energy Saver Settings and Timer Settings.
Energy Saver Settings
1.
Click Energy Saver/Timer under Device Settings on the navigation menu. The Energy
Saver/Timer Settings page opens.
2.
You can configure the following settings.
Sleep Level
Select Quick Recovery or Energy Saver. Even if you selected either sleep level,
the machine can recover from the sleep mode when you press any key on the oper-
ation panel or the machine received the print or fax job.
Quick Recovery recovers from the sleep mode faster than Energy Saver.
Energy Saver reduces power consumption even more than Quick Recovery, and
allows sleep mode to be set separately for each function. The time required for the
machine to wake up from the sleep mode and resume normal operation will be lon-
ger than for Quick Recovery.
Alternatively, on some models, the Sleeping page appears on the embedded web
server while the system is engaged in Energy Saver. You can click Start on the
Sleeping page.