E-mail – Kyocera Command Center RX User Manual

Page 45

Advertising
background image

Function Settings

User Guide

41

Resolution

Select the resolution from the drop-down list.

3.

Click Submit button.

E-mail

This section includes advanced settings for E-mail.

SMTP protocol

1.

Click E-mail under Function Settings on the navigation menu. The E-mail Settings
page opens.

2.

You can make changes for the following items as required.

SMTP Protocol

Display whether a SMTP connection is available or not. Configure SMTP in SMTP
(E-mail TX)
on the Protocols Settings page.

SMTP Server Name

Enter the SMTP server name or its IP address. If entering the name, rather than the
IP address, a DNS server address must also be configured. The DNS server
address may be entered on the TCP/IP Settings page.

SMTP Port Number

Enter the port number that SMTP will use (default is 25). Normally, use port 25, but
you can change the port number to suit the email server’s application and operation.
For example, the default port number for SMTP connections over SSL is 465. The
default port number for SMTP authentication is 587.

SMTP Server Timeout

Sets the timeout in seconds during which this device tries to connect to the SMTP
server.

Authentication Protocol

Enables or disables the SMTP authentication protocol or sets POP before SMTP as
the authentication type. When selecting On or POP before SMTP, you can select
user on the drop-down list. When selecting Other from Authentication as, you can
specify Login User Name and Login Password.

SMTP Security

Displays SMTP Security. This item appears when SSL/TLS or STARTTLS is
selected on SMTP Security of the Protocol Settings page.

POP before SMTP Timeout

Sets the timeout in seconds during which this device tries to connect to the POP3
server. You can configure this item when you selected POP before SMTP as
Authentication Protocol.

Advertising