Kyocera Command Center RX - Manual (Page 38)

Function Settings
34 Embedded Web Server
Background Density (Send/Store)
This removes dark background from originals, such as newspapers, when sending
or storing a job.
Continuous Scan (Copy)
Activates or deactivates Continuous Scan for copy.
Continuous Scan (Send/Store)
Activates or deactivates Continuous Scan for send or store.
Note: Some machine products disply Continuous Scan (Except FAX). Activates or
deactivates Continuous Scan except fax.
Continuous Scan (Fax)
Activates or deactivates Continuous Scan for fax.
Border Erase
Set the width of the outer and inner borders to erase in 0 to 50mm. You can set bor-
der erase for the reverse side.
Prevent Bleed-through (Copy)
Activate or deactivate Prevent Bleed-through for copying.
Prevent Bleed-through (Send/Store)
Activate or deactivate Prevent Bleed-through for sending and storing.
Skip Blank Page (Copy)
Activate or deactivate Skip Blank Page for copying.
Skip Blank Page (Send/Store)
Activate or deactivate Skip Blank Page for sending and storing.
Prevent Light Reflection
Activate or deactivate Prevent Light Reflection when using the Erase Shadowed
Areas feature.
3.
Click Submit button.
Output Default Settings
1.
Click Common/Job Defaults under Function Settings on the navigation menu. The
Common/Job Default Settings page opens.
2.
You can make changes for the following items as required.
EcoPrint
Switches EcoPrint On or Off to control toner consumption for saving the printing
costs. The default setting is Off. When selecting On, you can select Toner Save
Level from 1 (Low) to 5 (High), according to the machine.