Kyocera Command Center RX - Manual (Page 34)

Device Settings
30 Embedded Web Server
Override A4/Letter
Specifies whether or not the A4 and Letter size paper should be interchangeable.
When turned On, for example, if the A4 paper is not in the tray, the Letter size paper
will be selected for printing. When turned Off, the Letter size paper will not be used
in place of the A4 paper, when A4 is selected for printing but the A4 tray is empty.
Measurement
Select the unit of measurement for entry.
Preset Limit
Specify the number of copies limited to print.
Default Screen
Select the screen to set as the default screen.
Default screen for Send/FAX
Select the screen to set as the default screen.
Default Address Book
Select the type of default addressbook to set.
Orientation Confirmation
Activate or deactivate the prompt that confirms the orientation of original docu-
ments.
Altitude Adjustment
Select an altitude from the drop-down list according to your operating environment.
Bluetooth
Specifies whether to use the bluetooth keyboard.
Numeric Keyboard Settings
You can configure the following settings.
1. Default Display (Copy/Box Print): Specifies whether to display the numeric
keyboard on Copy/Box print screen.
2. Default Display (HyPAS Application): Specifies whether to display the numeric
keyboard when using the HyPAS application.
3. Layout (HyPAS Application): Select the keyboard layout when activating the
HyPAS application.
NFC
Specifies whether to perform the wireless comminication using NFC.
3.
Click Submit button.
Error Settings
1.
Click System under Device Settings on the navigation menu. The System Settings
page opens.
2.
Make changes in the settings if needed.