Kyocera Command Center RX - Manual (Page 42)

Function Settings
38 Embedded Web Server
Paper Feed Mode
Determines the behavior of paper feed selection when the paper you requested of
size and/or type is not available in the current paper source. Auto lets the machine
to search for the matching paper including all the paper sources. Fixed does not
perform searching in the other paper sources.
Form Feed Timeout
Adjusts the form feed timeout between 5 and 495 seconds in 5-second increments.
A form feed will occur in the absence of data during this time period. The default set-
ting is 30 seconds.
Job Name
Select the job number, job name, etc.
User Name
Activate or deactivate to use User Name.
Message Banner Print
Each time a banner page is printed, the machine halts and displays a message that
prompts you to continue banner printing. You can activate (On) or deactivate (Off)
this message.
Wide A4
Activate (On) or deactivate (Off) Wide A4 size for printing.
Auto Cassette Change
You can select the actions when the paper runs out in the paper source while print-
ing.
When selecting Off, the machine displays message to load paper in paper cassette
and stops printing. Load the paper according to the paper source displayed to
resume printing. You can also select the desired paper source.
When selecting On, the machine continues printing automatically if the other paper
cassette contains the same paper as the currently-used paper cassette.
Remote Printing
Permit or prohibit remote printing.
3.
Click Submit button.
AirPrint Settings
1.
Click Printer under Function Settings on the navigation menu. The Printer Settings
page opens.
2.
Click Settings button. The AirPrint Settings page opens.
You can make changes for the following items as required.
AirPrint
The default setting is On.