Kyocera Command Center RX - Manual (Page 86)

Security Settings
82 Embedded Web Server
3. Maximum password length: Turn to On and select the length in the number of
characters from the drop-down list. 1 – 64 characters.
4. Password complexity: Select the password complexity from No more than two
consecutive identical char, At least one uppercase letter (A-Z), At least one
lowercase letter (a-z), At least one number (0-9), or At least one symbol.
5. Password Policy Violated User List: Clicking the User List button will display a
list of users that are in violation of the password policy.
User Account Lockout Settings
You can assign a specific user account that you want to exclude.
1. Lockout Policy: To set the password policy, set this to On and configure the
following.
2. Number of Retries until Locked: Select the number of password retries until the
account is locked, from the drop-down list (1 – 10 times).
3. Lockout Duration: Select the time period in minutes until the account is excluded,
from the drop-down list (1 – 60 minutes).
4. Lockout Target: Select the users that you want to exclude, either All or Remote
Login Only.
5. Locked out Users List: Clicking the User List button will display a list of users
that are excluded.
3.
Click Submit button.
Unusable Time Setting
This determines the time period during which the machine is restricted for use.
1.
Click Device Security under Security Settings on the navigation menu. The Device
Security Settings page opens.
2.
This section includes the following items for configuration.
Unusable Time
Set On to use it. When this is On, the machine is unusable during the time period
from Start Time to End Time. To use the machine during this period, an unlock
code must be entered.
Start Time
Select the time of beginning of unusable time, from the drop-down list.
End Time
Select the time of ending of unusable time, from the drop-down list.
Unlock Code
Define an unlock code that you can use to temporarily deactivate the unusable time.
Enter a digit from 0000 to 9999.
Data Security Settings
This setting appears when an optional Data Security kit is activated. Click Settings
button to open the Password page. Enter the password and click OK button to
enable the data security function.