Kyocera Command Center RX - Manual (Page 94)

Management Settings
90 Embedded Web Server
Printed Pages
From the drop-down list, select Printed Pages by Function, Printed Pages by
Paper Size, or Printed Pages by Layout as needed for assign a limit.
Scanned Page Counts
Shows the total scanned pages of Copy, FAX, and Other Scan.
FAX Counter
Shows the total pages and times of sending faxes.
Counter Reset
Click Reset button to reset the counters.
4.
Click Counter button of Other Account or Total Account to view the result accounting.
Other Account
The total number of copies accounted for other account is displayed.
Total Account
The total number of copies accounted for all account is displayed.
Authentication
This section includes advanced settings for authentication.
Settings
To enable authentication, you must first make the authentication settings.
1.
Click Authentication under Management Settings on the navigation menu. The
Settings page opens.
Note: Administrator Information page opens according to the machine. You can
configure the login user name and password from the page.
2.
Click Settings button. The Authentication Settings page opens. This section includes
the following items for configuration.
General
For Authentication, select one of Off, Local Authentication and Network
Authentication from the drop-down list.
Action Settings
For processing unknown ID jobs, select either Permit or Reject. To configure this,
go to the Job Accounting Settings page.
3.
If you have selected Local Authentication in General in step 2 above, switch Local
Authorization On or Off.
If you have selected Network Authentication in General in step 2 above, configure the
following settings.
1. Configure the Network Authentication Server.