ProSoft Technology MVI56-PDPMV1 - Manual (Page 19)

MVI56-PDPMV1 ♦ ControlLogix Platform Start Here
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 19 of 255
March 22, 2011
If the message "MVI56-PDPMV1 Firmware Version = x.xx" does not appear on
the screen, the module firmware version is 0.30.
Checking the Version After Power-Up
If the correct sample program (LEGACY or FLEX) is loaded into your processor
and the module is located in same slot that was configured, then after module
power-up it will be possible to access the debug menu through ProSoft
Configuration Builder (PCB).
1 Press [?] to display the main menu: