ProSoft Technology MVI56-PDPMV1 - Manual (Page 54)

Start Here MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual PROFIBUS DPV1 Master
Page 54 of 255 ProSoft Technology, Inc.
March 22, 2011
5 The following window will be displayed showing the controller tags associated
with the project. The I/O connection parameters will be set (as default) as
L OCAL :1:I
and
L OCAL :1:O, which assumes that the module is located at the
local rack and Slot 1.
6 If your module is located in a different slot or in a remote rack, modify the
parameters to set the correct path to the module, as follows: