Change a scan button’s default settings, 6change a scan button’s default settings – Brother ADS-2400N User Manual
Page 128
Scan Using Your Computer
112
6
Change a Scan Button’s Default Settings
6
1
Hold down the Control key on your keyboard, and then click the ControlCenter2 scan button that you
want to change. When the menu appears, click Software Button or Device Button. The settings dialog
box appears.
2
Choose the settings for File Type, Scan Type, Document Size, Brightness, Contrast, 2-sided Scanning
and Continuous Scanning as needed.
3
Click OK. The new settings will be used as the default settings.
Scan Specific and Irregular Sized Documents Using the Carrier Sheet
6
1
Load the Carrier Sheet (see Receipts, Clippings, Photos, and Other Documents on page 67).
NOTE
Load only one Carrier Sheet at a time.
2
Click the
(ControlCenter2) icon in the Dock.
The ControlCenter2 window appears.
NOTE
If the
(ControlCenter2) icon is not displayed in the Dock, in the Finder menu bar,
click Go > Applications > Brother, and then double-click the
(ControlCenter2) icon.
The
(ControlCenter2) icon appears in the Dock.