Brother ADS-2400N - Manual (Page 140)

Scan Using Your Computer
124
6
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
Setting Description Applicable Feature
Image
OCR E-mail File
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is suitable
for most images. Set the Brightness level by dragging the
slider to the right or left to lighten or darken the image. If
the scanned image is too light, set a lower Brightness level
and scan the document again. If the image is too dark, set
a higher Brightness level and scan the document again. Yes Yes Yes Yes
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is suitable
for most images. Increase or decrease the contrast level
by moving the slider to the right or left. An increase
emphasizes dark and light areas of the image, while a
decrease reveals more details in gray areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Yes Yes Yes Yes
Color Drop Deletes specific colors from your scanned data.
Select one of the following:
 Chromatic color
Use to remove all colors except Black.
 Red
Use to remove the Red color.
 Green
Use to remove the Green color.
 Blue
Use to remove the Blue color.
 Custom
Select the color that you want to remove.
Yes Yes Yes Yes