Brother ADS-2400N - Manual (Page 238)

Scan Using the Control Panel
222
7
Document Size Document size is set to Auto by default. You can scan
documents of any size without making adjustments to
Document Size. For faster scan speeds, select the exact
size of your document from the Document Size pop-up
menu.
NOTE
• If you select a 1 to 2 document size, the scanned
image will be divided into two documents that are half
the size of the setting. For example, if you select
1 to 2(A4), the scanned image will be divided into two
A5-size documents.
• To do 1 to 2 scanning, clear the Auto Image Rotation
check box in the Advanced Settings dialog box.
• If you select a 2 in 1 document size, two scanned
images will be combined into one document.
Yes Yes Yes Yes
Restore Defaults Restore all settings to their factory default values. Yes Yes Yes Yes
Carrier Sheet
Mode Scan the following documents using the Carrier Sheet.
For this mode, select any setting other than Auto from the
Document Size pop-up menu.
 Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
Select 2 in 1(A4) for an A3 document, 2 in 1(B5) for a
B4 document or 2 in 1(Letter) for a Ledger document
from the Document Size pop-up menu.
 Important documents (photos, contracts)
 Thin paper (receipts)
 Irregularly-shaped paper (clippings)
NOTE
• Load only one Carrier Sheet at a time.
• Insert the document in the center of the Carrier Sheet
and align the top of the document with the top of the
Carrier Sheet.
Yes Yes Yes Yes
Setting Description Applicable Feature
Image
OCR E-mail File