NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 139
7. Select the Admin mode Disable or Enable radio button to disable or enable the
DHCP relay on the switch.
8. In the Minimum Wait Time field, enter the minimum time in seconds that the DHCP
relay must wait before forwarding requests.
The time is compared to the time stamp in the client's DHCP request packets, which
represents the time since the client was powered up. Packets are forwarded only
when the time stamp exceeds the minimum wait time. The range is from 0 to 100.
9. Select one of the following Circuit ID Option Mode radio buttons:
•
Disable: Relay agent options are not added to requests before they are forwarded
to the server and not removed from replies before they are forwarded to clients.
•
Enable: Relay agent options are added to requests before they are forwarded
to the server and removed from replies before they are forwarded to clients.
•
None: The Circuit ID option is not configured. This selection is effectively the
same as the Disable selection.
10. Select one of the following Server Override Mode radio buttons:
•
Disable: Suboption 5 and suboption 11 are not added to Option 82 of the
incoming DHCP packet.
Suboption 5 specifies the IP subnet from which the DHCP server must assign an
IP addresses.
Suboption 11 specifies that the server ID can be replaced with a new ID.
•
Enable: Suboption 5 and suboption 11 are added to Option 82 of an incoming
DHCP packet.
11. From the Source Interface menu, select an interface or VLAN.
This is the interface or VLAN that is connected to the DHCP servers that are located
in a different IP subnet.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
14. To refresh the information on the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 36. DHCP relay status information
Description
Field
The number of DHCP requests received from the clients.
DHCP client messages received
The number of DHCP requests forwarded to the servers.
DHCP client messages relayed
Main User Manual
139
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual