NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 373)

MAC address information and group MAC address membership. The default is
Disable.
8. Select the MSRP Enable or Disable radio button to specify the global administrative
mode of MSRP on the switch.
Enabling this mode allows the switch to reserve resources in the network to facilitate
time-sensitive traffic to flow end to end. The default is Disable.
9. Select the MSRP Talker Pruning Enable or Disable radio button.
Enabling this mode limits the switch to transmitting talker protocol data units (PDUs)
to destination MAC addresses that are in the Multicast Forwarding Table (MFDB). A
talker PDU is the source of on audio-video stream. The default is Disable.
10. Select the Periodic State Machine (MVRP Mode) Enable or Disable radio button.
Enabling this mode can limit the effect of MVRP topology changes and reduce the
number of PDUs transmitted between devices. The default is Disable.
11. Select the Periodic State Machine (MMRP) Enable or Disable radio button.
Enabling this mode can limit the effect of MMRP topology changes and reduce the
number of protocol data units (PDUs) transmitted between devices. The default is
Disable.
12. In the MSRP Max Fan In Ports field, specify the maximum number of interfaces on
which MSRP registrations are allowed.
The range depends on the switch model. The default is 0, which means that no limit
is imposed on the number of interfaces.
13. Select the MSRP Boundary Propagation Enable or Disable radio button.
When you enable MSRP boundary propagation, depending on the configuration, a
stream reservation can be allowed to cross a boundary port.
The default is Disable.
14. In the MSRP PDU Transmit Time Gap field, specify the period between the transfer
of two consecutive MSRP PDUs after the LeaveAll time expires.
After the LeaveAll time expires, all participants are deregistered and must rejoin by
responding to the PDUs that the switch sends. By sending consecutive MSRP PDUs
at an interval, the packet buffer of a receiving endpoint does not overflow. The period
between consecutive MSRP PDUs is a value in milliseconds.
15. Click the Apply button.
Your settings are saved.
16. To save the settings to the running configuration, click the Save icon.
Main User Manual 373 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual