NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 871)

• Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.
• Routing interface: The primary IP address of a routing interface is used as the
source address.
• Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Different: For some features, Different can display. This means that the source
interface is configured separately.
7. Click the Apply button.
Your settings are saved.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 188. sFlow agent information
Description Field
The version and implementation of the MIB. The agent version consists of the
following components:
• MIB version: For example, 1.3.
• Organization: NETGEAR
• Revision: For example, 13.0.2.10.
Agent Version
The IP address associated with the agent. The IP address depends on your
selection of the source interface. Agent Address
Configure an sFlow receiver
You can configure one or more devices that must function as sFlow receivers. The sFlow
source interface provides the connection to these devices.
To configure an sFlow receiver:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual 871 Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual