NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 830)

The IP Binding Configuration page displays.
6. From the ACL ID menu, select an IP ACL.
NOTE: Binding an ACL to an interface fails is the switch has no resources
to bind a new ACL. In addition, you cannot bind both an IPv4 ACL and an
IPv6 ACL to an interface.
7. From the Direction menu, select the packet filtering direction for the ACL:
• Inbound: The rule is applied to traffic entering the port.
• Outbound: The rule is applied to traffic leaving the port.
8. In the Sequence Number field, optionally specify a number to indicate the order of
the access list relative to other access lists already assigned to the interface and
direction.
A low number indicates high precedence order. If a sequence number is already in
use for the interface and direction, the specified access list replaces the currently
attached access list using that sequence number. If you do not specify the sequence
number (meaning that the value is 0), a sequence number that is one number greater
than the highest sequence number currently in use for the interface and direction
is used. The range is from 1 to 4294967295.
9. To add the selected ACL to a port or LAG, in the Ports table (or if a stack is
configured, in one of the Ports tables) or LAG table, click the port or LAG so that a
check mark displays.
The Ports and LAG tables display the available interfaces for ACL bindings. You can
add the ACL to several ports and LAGs.
The ports for the switch (Unit 1) are displayed. If a stack is configured, the ports for
each stacked switch (Unit 1, Unit 2, and so on) are displayed. In addition, all LAGs
are displayed, whether or not a stack is configured.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 179. Interface Binding Status information
Description Field
The selected interface. Interface
The selected packet filtering direction for the ACL. Direction
The type of ACL assigned to the selected interface and direction. ACL Type
Main User Manual 830 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual