NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 751)

9. From the Invalid Packets menu, select the packet logging mode.
When enabled, the DHCPv6 snooping feature generates a log message when an
invalid packet is received and dropped by the interface.
10. In the Rate Limit (pps) field, specify the rate limit value for DHCPv6 snooping
purposes.
If the incoming rate of DHCPv6 packets per second exceeds the configured burst
interval per second, the port shuts down. If the rate limit is None (which is the default),
the burst interval is also not applicable, and rate limiting is disabled.
11. In the Burst Interval (secs) field, specify the burst interval in seconds for rate limiting
on the interface.
If the rate limit is N/A, the burst interval is not applicable.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
Add a static DHCPv6 binding and display
or clear dynamic DHCPv6 bindings
You can add a static binding in the DHCPv6 snooping bindings database and display
or clear the dynamic bindings in the bindings table.
To add a static DHCPv6 binding and display or clear the dynamic bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCPv6 Snooping > Binding Configuration.
The Binding Configuration page displays.
Main User Manual 751 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual