Polycom WEBCOMMANDER 8 User Manual
Page 102
Chapter 5 - Monitoring an On Going Conference
5-26
The following participant statuses may be indicated in the Participant
ToolTip:
•
Stand By - In a dial-out conference, the participant waits to be connected
to the conference by the operator. When connecting, the status changes to
Connecting.
•
Connected - The participant is connected to the conference.
•
Partially connected - The connection process is not yet complete.
•
Secondary - The participant is connected via Audio Only as the video
channel could not be connected to the conference.
•
Faulty connection - The participant is connected, however there are
problems in the connection, such as synchronization loss.
•
Disconnected - The participant was disconnected from the conference
either by the participant or by the operator/system.
When pointing to the Status or Media button (audio, video or data), a ToolTip
appears, indicating the media status.
When pointing to any Status or Media button the Tooltip indicates what happens
when you click the button. For example when you point to the Connection Status
button, the ToolTip indicates Mute Video.
Connected video status indication
The ToolTip indicates which operation can
now be performed when you click the
video status button