Polycom WEBCOMMANDER 8 - Manual (Page 172)

Chapter 5 - Monitoring an On Going Conference
5-96
The Lecture mode window opens.
2. In the drop-down box, select any of the following modes:
— Lecture Mode
— Presentation Mode
— None (when selected disables the mode)
3. To enable the automatic switching between participants on the Lecturer
monitor, select the Timer check box to enable/disable the timed
switching. A check mark indicates that the Timer is enabled.
4. If the Timer is enabled, select the number of seconds a participant is
displayed on the lecturer monitor before switching to the next participant
from the Interval drop-down list.
5. In the Lecturer Name drop-down list, select the lecturer name. The list
includes the names of all participants currently connected to the
conference. The selected lecturer name appears in the text field.
6. Click Apply and then click OK to confirm and return to the Meeting
Director window.