Polycom WEBCOMMANDER 8 User Manual
Page 65
MGC WebCommander User’s Guide
4-33
If the conference was started successfully on the MCU and the Meet Me
Per Conference option is set for the conference, the system displays the
dial-in number that should be used by the conference participants, for
ISDN/T1-CAS and H.323 participants.
The ISDN phone number is based on the dial-in phone number’s range
defined for the MCU. If the PBX truncates the first digits these digits
have to be added to the number communicated to the conference
participants. The H.323 dialing string is composed of the H.323 Network
Service Prefix and the conference Numeric ID. The conference Numeric
ID is listed separately, and it is used for routing to conferences accessed
from the Entry Queue.
Once the reservation has been defined, the system automatically creates
the recurring reservations in the calendar. The name of each of the
recurring reservations is derived from the name of the first reservation
(Conference template), followed by sequential numbers, using the format
“name_X”, where X is its sequential number. For example, if the first
reservation is named “Polycom 1_admin1_43946”, and the number of
occurrences is three, the system creates three reservations, naming the
first “Polycom 1_admin1_43946_1”, the second “Polycom
1_admin1_43946_2” and the third “Polycom 1_admin1_43946_3”.