Polycom WEBCOMMANDER 8 - Manual (Page 392)

Chapter 11 - Managing Participant Templates
11-16
Encryption Choose any of the following Encryption options:
• Auto - When participants connect to a
conference, the conference/Entry Queue
encryption settings are automatically applied to
the participant. For example, when a conference/
Entry Queue is set to encryption the participant is
also encrypted (if the flag in the MGC Manager
ALLOW_ENCRYPT_IN_PARTY_LEVEL is set to
YES).
• On - enables encryption at the participant level (if
the flag MGC Manager
ALLOW_ENCRYPT_IN_PARTY_LEVEL is set to
YES).
• Off - disables encryption
Note: Undefined participants are connected with the
Participant Encryption option set to Auto, inheriting
the Conference/Entry Queue encryption setting.
Number of
Channel Indicates the number of channels used for the
connection.
Select Auto to use the conference’s Line Rate
setting. This is also the mode recommended for ATM
connections.
If the participant’s setting is different from the
conference setting, select the appropriate number of
channels.
AGC The Auto Gain Control mechanism regulates noise
and audio volume by keeping the received signal to
all participants balanced. Different endpoints and
phones produce different types of source noise and
volume. The Auto Gain Control mechanism can be
applied to all incoming audio streams prior to mixing,
thereby dynamically changing the amplification of the
input signal providing a constant output amplitude.
Select this check box to enable Auto Gain Control
(AGC) for the participant.
Table 11-3: Advanced Connection Parameters for Video ISDN/ATM/MPI
Option Description