Polycom WEBCOMMANDER 8 - Manual (Page 359)

MGC WebCommander User’s Guide
10-73
Network Services are defined in the MGC Manager application. For
more information, refer to the MGC Administrator’s Guide, Chapter 3.
The list of dial-in numbers assigned to the conference is displayed in the
Meet-Me Services table. The first column displays the ISDN Network
Service name. The Phone 1 and Phone 2 columns display the first and
second dial-in numbers assigned to the conference, for each listed
Network Service.
Before you manually allocate dial-in number(s) to the conference you
need to check the Network Services for the dial in numbers that can be
allocated to conferences.
This procedure is optional and should be used only if you want to
allocate a specific number to the conference. Otherwise, skip this
procedure and the MCU automatically allocates the dial-in number.
7. To manually enter the phone numbers for the conference, define the
following parameters, as described in Table 10-17.
If the conference includes T1-CAS Audio Only participants and the
MCU is configured to allow T1-CAS participants in video conferences,
you can manually allocate the dial-in number for the T1-CAS
participants.
If no dial-in number is defined, the system automatically assigns the first free
number in the dial-in numbers range defined in the default ISDN Network
Service.
Table 10-17: Meet Me Per Conference Phone Numbers
Option Description
Service Name Type the name of the Network Service (to be used by
the participants to connect to the conference) exactly
as it is defined in the Network Service (the system is
case sensitive).
Phone 1 Enter the first number to be assigned to the
conference.
Phone 2 Enter the second number to be assigned to the
conference. This number is optional.