Polycom WEBCOMMANDER 8 - Manual (Page 349)

MGC WebCommander User’s Guide
10-63
3. Define the conference advanced parameters as described in Table 10-15.
Table 10-15: Audio Only–Advanced Conference Options
Option Description
Auto
Termination Select this check box to automatically terminate the
conference when:
• No participant has connected to the conference
during a predefined time period. The period is
defined in the Before First Join x Min field.
• All participants have disconnected from the
conference and the conference is idle for a
predefined time period.
The period is defined in the After Last Quit x Min field.
Minutes Before
First Join This option is enabled when the Auto Termination
option is selected.
Enter the number of minutes that should pass since
the conference has started without any participant
connection to the conference, before the conference is
considered idle. If no participant has joined the
conference during this period, it will automatically be
terminated.
Minutes After
Last Quit This option is enabled when the Auto Termination
option is selected.
Enter the number of minutes that should pass after the
last participant has disconnected from the conference,
before the conference is considered idle. If the
conference remains idle and no other participant joins
in during this period, the conference will be
automatically terminated.
Dial-Out
Manually Select this check box to designate an operator-
controlled dial-out conference connection. If Dial-Out
Manually is selected, the operator or meeting
moderator must connect each of the dial-out
participants.