Polycom WEBCOMMANDER 8 - Manual (Page 246)

MGC WebCommander User’s Guide
7-36
Conference Types According to the MCU Configuration
The functional modules installed in the MCU determine the conferences that
can be run by the MCU.
• Audio Only conferences are automatically routed to the Audio+ card. If
no card is available an error message is displayed.
• Video Continuous Presence conferences are routed to the standard Video
card, (The operator can change this selection by manually setting the
Conf Audio field to Advanced).
• Video Continuous Presence conferences set to Quad Views and COP
conferences with or without any of the visual effects, and Continuous
Presence conferences with any of the visual effects are routed to the
Video+ card.
Video Standard
and
Meeting
Room All
(ISDN, ATM
T1-CAS, IP,
MPI) • Video
Switching
• Transcoding
• Continuous
Presence
— Classic
— Quad
Views
T1-CAS supports
Audio Only
conferences only.
IP only • Video
Switching
• Transcoding
• Continuous
Presence
— Classic
— Quad
Views
— Software
Software CP is
available for IP
only conferences.
Operator All: ISDN,
ATM, IP, MPI Transcoding T1-CAS supports
Audio Only
conferences only.
IP only Transcoding
Table 7-3: Media options by conference type (Continued)
Media Conf Type Network Session Type Notes