Polycom WEBCOMMANDER 8 User Manual
Page 125
MGC WebCommander User’s Guide
5-49
3.
For users with the View Mode: Administrator permission, the Advanced
tab is available for defining additional parameters. If required, click the
Advanced tab.
The Participant Properties - Advanced window opens.
4.
Define the Advanced Participant Properties as described in Chapter 4,
“Defining a New Participant from the New Meeting Window” on page 4-
19.
5.
Click OK.
The participant is automatically added to the participants list in the
Meeting Director window.
Adding a new T1-CAS participant during an On Going Conference
You can define a new T1-CAS participant during the monitoring of an On
Going conference. The T1-CAS participant is automatically added to the
conference. If desired, the T1-CAS participant can also be added to the
database. If the T1-CAS participant is not added to the database, once the
conference is terminated the T1-CAS participant is deleted from
WebCommander together with the On Going conference.
•
T1-CAS Network Service allows connection of Audio Only participants and is
intended for VoicePlus configurations or MCUs running Audio Only
conferences using T1-CAS lines.
•
T1-CAS participants may take part in a video conference as Audio Only
participants if the MCU is configured accordingly.