Polycom WEBCOMMANDER 8 - Manual (Page 75)

MGC WebCommander User’s Guide
4-43
Direct Dial-in Scenario—SIP Environment
If the IP address of the MCU IP card is known, a direct endpoint to MCU
connection is possible, but not recommended. This direct connection uses the
Redirect mode only.
The SIP endpoint dials the IP address of the IP card or its host name.
Figure 4-2: SIP Environment - Dial-in and Dial-out
Dial-out Scenario—SIP Environment
The dial-out scenario is identical to the dial-in scenario, except for the
initiating party, that is the MCU. In dial-out conferences, the endpoint clients
need to be registered, so the registrar can provide location details when the
MCU invites them to join the conference.
For example, the MCU dials:
[email protected] .
MCU
SIP UA
SIP UA
SIP UA
[email protected]
[email protected]
[email protected]