Polycom WEBCOMMANDER 8 - Manual (Page 71)

MGC WebCommander User’s Guide
4-39
Dialing into the Conference
Defined ISDN Participants Dial-in
ISDN participants can dial-in to a conference directly or via an Entry Queue.
Alternatively, if the conference is defined as Meet Me Per Conference or
Meeting Room, participants can simply dial-in to the number assigned to the
conference.
The dial-in number that should be used by participants to connect to the
conference is displayed when the conference is saved on the MCU and is also
sent to participants in the E-mail (if you have selected to send one).
When the conference is defined as Entry Queue access, the dial-in number of
the first Entry Queue in the list of Entry Queues is indicated as the dial-in
number. In addition, the conference properties detailed in the E-mail include
the conference Numeric ID which is required to route the participant from the
Entry Queue to his/her target conference.
If required, you can view the dial-in number assigned to a conference in the
Meeting Director window or the Meeting Rooms list window.
For more information about defining Entry Queue and accessing a conference
via an Entry Queue, see the MGC Manager User’s Guide Volume I, Chapter 8.
T1-CAS participants are only able to dial-in to a conference defined as a Meet
Me Per Conference or Meeting Room or to an Entry Queue used for routing
participants to their target conferences.